• SD Card installation instructions using Etcher
  • Step 1: Download the Avenger96 SD Card image, unzip/untar your download and be sure to recall the location of the file.
  • Step 2: Download Etcher SD Card installation tool for your host machine.
  • Step 3: Insert SD card into host machine (Minimum requirment of 16GB)
  • Step 4: Follow the Etcher prompt:
  • Step 5: Removed SD card from host machine and insert into Avenger96 board (on board SD card slot)
  • Step 6: Follow booting instructions from Getting Started guide

SD Card installation instructions using Etcher

Step 1: Download the Avenger96 SD Card image, unzip/untar your download and be sure to recall the location of the file.

Step 2: Download Etcher SD Card installation tool for your host machine.

Step 3: Insert SD card into host machine (Minimum requirment of 16GB)

Step 4: Follow the Etcher prompt:

• Select the unzipped/untared image from your file directory
• Select drive to which you wish to write (i.e. you SD card)
• Click “Flash!” Button
• Wait for SD card to completely flash and follow prompt.

Step 5: Removed SD card from host machine and insert into Avenger96 board (on board SD card slot)

Step 6: Follow booting instructions from Getting Started guide